Settings
Change Codes
(Menu 9.7.3)
The Change Codes feature allows you to change your
current password to a new one. You must enter the
current password before you can specify a new one.
You can change the access codes: Security Code,
PIN1 Code, PIN2 Code
Note
n
PIN: Personal Identification Number.
Note
n
Be sure to store any changes you make in a place you can
remember or contact your service provider if you need to
reset your security codes.
Connection
Network Selection
(Menu 9.8.1)
The Network Selection feature allows you to indicate
how the network you will use is selected when
roaming outside your home area.
Options are: Automatic, Manual and Preferred.
74
: Shown only if supported by SIM card
*
Note
n
You can select a network other than your home network
only if it has a valid roaming agreement with your home
network.
]
Automatic: Allows you to set the phone to
automatically search for and select one of the
cellular networks available in your area. The phone
will be set to Automatic by default.
]
Manual: Allows you to select the desired network
manually from a list of networks. If the connection
to the manually selected network is lost, the phone
will sound an error tone and ask you to select a
network again. The selected network must have a
roaming agreement with your home network, that is,
the operator whose SIM card is in your phone. The
Menu 9.8
phone lets you select another network if the phone
fails to access the selected network. If you switch
off the phone, the phone will be reset to Automatic.
]
Preferred: You can set a list of preferred networks
the handset should attempt to register with first,
before attempting to register to any other networks.
This list is created from the handset's predefined list
of known networks.