Using Phone Menus
: Dual-Tone Multi Frequency (DTMF) Signaling by the
NOTE
simultaneous transmission of two tones, one from a group of low
frequencies and another from a group of high frequencies. Each
group of frequencies consists of four frequencies. Setting the Key
Tone length to Long will extend the DTMF tone.
1.3 Volume
Allows you to set various volume settings.
1.
Press
,
,
,
2
Select a type of emitted sound.
Ringer / Earpiece / Key Beep / Speaker
3.
Use
to adjust the volume of the selected item,
then press
to save the change.
1.4 Message Alerts
Allows you to set various alert settings for messages.
1.
Press
,
,
,
2.
Select the type of message alert.
Voice Mail Alert / Text Msg Alert / E-mail Alert /
Page Alert / 2 Min Alert
62
62
VX6100
VX6100
.
.
3.
Use
to select an alert setting, then press
to save the change.
Silent / Vibrate Once / Vibrate and Sound / Custom
Ring Tone / Low Beep Once / Low Beeps / Loud
Beep Once / Loud Beeps
: The 2 Min Reminder can be set to On or Off.
NOTE
1.5 Service Alerts
Allows you to set any of the five Alert options to either On
or Off.
1.
Press
,
,
,
2.
Select the type of Service Alert.
Service Change / ERI Sounds / Minute Beep /
Call Connect / Back To Top
1.5.1 Service Change
Alerts you when service changes. Phone displays
Entering Service Area
or
Leaving Service Area
1.5.2 ERI Sounds
Alerts you to the status of cellular service.
.
message.