M.2 Solid-State Drive - Lenovo ThinkPad P15s Gen 2 User Manual

4. Remove the base cover assembly. See "Base cover assembly (T14 Gen 2 and P14s Gen 2)" on page 34
or "Base cover assembly (T15 Gen 2 and P15s Gen 2)" on page 36.
Removal procedure
Installation procedure

M.2 solid-state drive

Prerequisite
Before you start, read and print the following instructions.
Generic Safety and Compliance Notices
Attention: If you replace a M.2 solid-state drive, you might need to install a new operating system.
The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and permanent loss of
data.
When handling the M.2 solid-state drive, observe the following guidelines:
• Replace the M.2 solid-state drive only for upgrade or repair. The M.2 solid-state drive is not designed for
frequent changes or replacement.
• Before replacing the M.2 solid-state drive, make a backup copy of all the data that you want to keep.
• Do not apply pressure to the M.2 solid-state drive.
38
T14 Gen 2, T15 Gen 2, P14s Gen 2, and P15s Gen 2 User Guide