Table of Contents
Advertisement
LX370_Eng_090403:Sprint_UG_8a 09. 04. 04 오오 3:04 Page 27
1.
From a screen where you can enter text, press
(right softkey) and select
OPTIONS
change the text input mode.
2.
Select one of the following options:
to use multi-tap entry – press
Abc
"a," twice for "b," three times for "c" (see "ABC
Mode" on this page).
to enter text using a predictive
Predictive Text
text-entry system that reduces the number of
keypresses required to enter a word (see
page 28).
to enter numbers by pressing the numbers on
123
the keypad (see page 29).
to enter symbols (see page 29).
Symbols
Emoticon
to enter emoticons (see page 29).
to enter text entry settings.
Settings
Tip
When entering text, press
capitalization ( Abc>ABC>abc ).
ABC Mode
to
Text Mode
1.
Select the Abc mode. (See "Selecting a Text Input
Mode" on page 26.)
2.
Press the corresponding keys repeatedly until the
once for
correct letter appears. (For example, to enter the
word "Bill," press
three times, and
a mistake, press
Press and hold
By default, the first letter of a sentence is capitalized and
the following letters are lowercased. After a character is
entered, the cursor automatically advances to the next
space after two seconds or when you enter a character
on a different key.
to change letter
twice,
three times,
three times again.) (If you make
to erase a single character.
to erase an entire word.)
2A. Phone Basics
27
Advertisement
Table of Contents
