Wireless ADSL Modem
PPP settings:
User name &
password
PPP Settings:
Type
5.2.3 Bridged
With bridging the router has a static IP address for connection. The router passes traffic
through to another device (a computer or router for example) that handles authenticating
with the ISP. Enter VPI and VCI according to your local region and select the appropriate
Encapsulation mode. Click Add to add your configuration and then click Save button on
the left bottom.
in wide use.
Enter the user name and password that your ISP gives you.
Continuous: If you want to access the Internet all the time,
select Continuous type.
Connect on Demand: Select this type when you don't want the
connection up all the time and specify an idle time-out in the
Idle Time field.
Manual: When connect type of PPPoE and PPPoA only is
"Manual", the "Connect" and "Disconnect" button will be
enable.
15
USER MANUAL