Charging - Panasonic ES-RT53 Operating Instructions Manual

Charging

Turn the shaver off before inserting.
Wipe off any water droplets on the Appliance socket.
1. Insert the appliance plug
into the shaver.
2. Plug the AC adaptor into
a household outlet.
Make sure that battery
capacity / battery capacity
lamp is on. If the battery
capacity is too low, charge
status / charge status lamp
will not turn on immediately.
The charging time is approx. 1 hour.
The charging time may differ with the charging capacity.
3. Disconnect the AC adaptor after charging is
completed.
You cannot operate the shaver while charging.
Note
If there is noise from the radio or other sources while using or
charging the product, move to a different location to use the
product.
Reading the LCD panel or the LED display when charging
2
The charge status (
1
The battery capacity and the
While charging
ES-RT53
) glows.
The LCD panel shows the
remaining battery capacity
from 0% to 100%, in 20%
increments.
After charging is completed
ES-RT53
charge status ( ) will light
up and then turn off after 5
seconds.
ES-RT33
The charge status lamp ( )
glows.
ES-RT33
After charging is completed,
the charge status lamp ( )
turns off after 5 seconds.
9