Connecting The Power Cord - Fujitsu PRIMERGY RX1330 M4 Operating Manual

Starting up
5.4.3

Connecting the power cord

In its basic configuration the server has a permanently installed PSU or a hot-
plug PSU. Besides the hot-plug PSU, a second hot-plug PSU can be installed
optionally to serve as a redundant power supply. If one PSU fails, the second
PSU in the redundant configuration ensures operation can continue
uninterrupted.
V
CAUTION!
The server is automatically set to a mains voltage in the range 100 V -
240 V. You may only operate the server if its rated voltage range
corresponds to the local mains voltage.
Ê Connect the power cord to the PSU.
Ê Connect the mains connector to an outlet on the socket strip of the rack.
I
It will take about 60 seconds until the server can be switched on.
I
For more information, see the technical manual for the rack.
68 Operating Manual
RX1330 M4