Operating Instructions
Operating Instructions
Remote Controller
1. Remove the battery cover by pulling it according to the arrow
direction.
2. Insert new batteries making sure that the (+) and (-) of battery are
installed correctly.
3. Reattach the cover by sliding it back into position.
Use 2 AAA(1.5volt) batteries.
NOTICE
Do not use rechargeable batteries.
Storage and Tips for using the Remote Controller
• The remote controller may be stored by mounting
it on a wall.
Signal Receptor
Receives the signals from the remote control.(Signal receiving sound: two short beeps or one long beep.)
Operation Indication Lamps
On/Off
Sleep Mode
Timer
Preheat Mode
Display
PLASMA Plasma
Energy-Saving
Cooling
Operation
heating
indicator
dehumidifi-
cation
Shape of
Setting
display
temp.
10 Room Air Conditioner
: Lights up during the system operation.
: Lights up during Sleep Mode Auto operation.
: Lights up during Timer operation.
: Lights up during Defrost Mode or Hot
Start operation (Heat pump model only)
: Indicates the setting temperature.
: Light up during PLASAM purification
operation.(optional)
: Light up during Energy-Saving cooling mode operation. (optional)
A.I operation mode
Standard
Too hot
Hot
• To operate the room air conditioner, aim the
remote controller at the signal receptor.
Comfortable
Cold
Too cold
Operation indicating
lamps
Jet
Test
Energy-saving
(Cool, Heat)
cooling mode
operation