Troubleshooting I.link Devices - Sony PCG-SR33K VAIO User Manual

Troubleshooting i.LINK devices

I cannot establish a connection between two VAIO
Disconnect the i.LINK
1.
Wait for the computers to respond. If neither computer responds after a few moments, restart both
2.
computers.
The computers may not recognize an i.LINK connection after returning from a power saving mode
(Standby or Hibernate). If that happens, restart the computers to establish a connection.
1
i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. The i.LINK connection may
vary, depending on the software applications, oper-ating system, and compatible i.LINK devices. All products with an i.LINK connection
may not communicate with each other. Refer to the documentation that came with your compatible i.LINK device for information on
operating conditions and proper connection. Before connecting compatible i.LINK PC peripherals to your system, such as a C D-RW or
hard disk drive, confirm their operating system compatibility and required operating conditions.
cable from both computers and reconnect it.
1
® computers when using an i.LINK ® cable.
Page 261