Presentation Timer Function; Using Keystone Function - LG HS102 Owner's Manual

Presentation timer Function

1. Press the MENU button and then use
2. Press the button to select
,
button.
3. Press the button to select
,
Time alarm
Time Keeper
MENU Exit
4. Press the button to select the desired preset time.
,
5. The timer for Time keeper item starts to operate if you select specific time and press the
the timer for Time alarm item starts to operate if you select specific time.
G Time alarm function : If you select a specific time, it is displayed in minute units. After 1 minute, the remaining
time is displayed at the bottom right of the screen, and then disappears after 5 seconds.
When the remaining time is displayed, other OSD windows are closed. When the set
time is reached, '0 minute' flickers 10 times at 1 second intervals, and then disappears.
G Time keeper function : If you select a specific time, it continues to be displayed in minute(') and second(")
G The Time alarm function and the
G The Time alarm function can be set from 5 to 60 minutes at 5 minute intervals (Off, 5, 10, 15, 20, ..............,
55, 60 minutes).
G The Time keeper function can be set from 1 to 10 minutes at 1 minute intervals, and from 10 to 60 minutes
al 5 minute intervals (Off, 1, 2, 3, 4, .............., 8, 9, 10, 15, 20, 25, .............., 55, 60 minutes).
G You can use this function through the
G Press the MENU button twice or the RETURN button to exit the menu screen.

Using Keystone Function

* Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape.
* Only use the Keystone function when you can't get the best angle of projection.
1. Press the KEYSTONE +, - button of remote control.
2. Press the KEYSTONE +, - button to adjust the screen condition as you want.
G can be adjusted from -20 to 20.
Keystone
G You can use the Keystone function on the
MENU button, or by pressing the
G You can use this function through the
G Press the MENU button twice or the RETURN button to exit the menu screen.
button to select the
,
Presentation timer
Time alarm
F G
Off
F G
Off
Move Select
units. Even though other OSD windows appear, the remaining time is displayed again
after the windows are closed. When the set time is reached. 0' 00" flickers 10 times at
1 second intervals, and then disappears.
Time keeper function cannot be used at the same time.
button on the control panel.
menu screen by pressing the
buttons on the control panel.
,
button on the control panel.
menu.
item and press
or Time keeper item.
Language
OK
Aspect Ratio
Overscan
Flip horizontal
Flip vertical
Sleep time
Auto sleep
Presentation timer
MENU Prev.
OK button, and
Keystone
Function
English
4 : 3
Off
Off
Off
To set
Move OK
0
27