Table of Contents
Advertisement
03. Screen Mute (Command:kd)
➜ To select screen mute on/off.
Transmission
[k] [d] [ ] [Set ID] [ ] [Data] [Cr]
Data
0 : Screen Mute Off (Picture On)
1 : Screen Mute On (Picture Off)
Ack
[d] [ ] [Set ID] [ ] [OK] [Data] [x]
Data
0 : Screen Mute Off (Picture On)
1 : Screen Mute On (Picture Off)
04. Contrast (Command:kg)
➜ To adjust screen contrast.
Transmission
[k] [g] [ ] [Set ID] [ ] [Data] [Cr]
Data
Min : 0 ~ Max : 64
* Refer to 'Real data mapping 1'.
Ack
[g] [ ] [Set ID] [ ] [OK] [Data] [x]
Data
Min : 0 ~ Max : 64
05. Brightness (Command:kh)
➜ To adjust screen brightness.
Transmission
[k] [h] [ ] [Set ID] [ ] [Data] [Cr]
Data
Min : 0 ~ Max : 64
* Refer to 'Real data mapping 1'.
Ack
[h] [ ] [Set ID] [ ] [OK] [Data] [x]
Data
Min : 0 ~ Max : 64
06. Color (Command:ki)
➜ To adjust the screen color. (Video/S-Video/Component)
Transmission
[k] [ i ] [ ] [Set ID] [ ] [Data] [Cr]
Data
Min : 0 ~ Max : 64
* Refer to 'Real data mapping 1'.
Ack
[ i ] [ ] [Set ID] [ ] [OK] [Data] [x]
Data
Min : 0 ~ Max : 64
07. Tint (Command:kj)
➜ To adjust the screen tint.(Video/S-Video/Component
60Hz or NTSC signal)
Transmission
[k] [ j ] [ ] [Set ID] [ ] [Data] [Cr]
Data
Red : 0 ~ Green : 64
* Refer to 'Real data mapping2'.
Ack
[ j ] [ ] [Set ID] [ ] [OK] [Data] [x]
Data
Red : 0 ~ Green : 64
08. Sharpness (Command:kk)
➜ To adjust the screen sharpness.(Video/S-Video/Component)
Transmission
[k] [k] [ ] [Set ID] [ ] [Data] [Cr]
Data
Min : 0 ~ Max : 64
* Refer to 'Real data mapping 1'.
Ack
[k] [ ] [Set ID] [ ] [OK] [Data] [x]
Data
Min : 0 ~ Max : 64
09. OSD Select (Command:kl)
➜ To select OSD On/Off.
Transmission
[k] [ l ] [ ] [Set ID] [ ] [Data] [Cr]
Data
0 : OSD Select Mode Off
1 : OSD Select Mode On
Ack
[ l ] [ ] [Set ID] [ ] [OK] [Data] [x]
Data
0 : OSD Select Mode Off
1 : OSD Select Mode On
10. Remote Control Lock/Key Lock
(Command:km)
➜ To lock the front panel controls on the
projector and remote control.
Transmission
[k] [m] [ ] [Set ID] [ ] [Data] [Cr]
Data
0 : Lock Off
1 : Lock On
Ack
[m] [ ] [Set ID] [ ] [OK] [Data] [x]
Data
0 : Lock Off
1 : Lock On
* If you're not using the remote control, use this mode.
When main power is On/Off, external control lock is released.
11. Color Temperature (Command:ku)
➜ Adjust the color temperature.
Transmission
[k] [u] [ ] [Set ID] [ ] [Data] [Cr]
Data
0 : Normal
1 : Cool
Ack
[u] [ ] [Set ID] [ ] [OK] [Data] [x]
Data
0 : Normal
1 : Cool
RS-232C
2:Warm
3 : Natural
2:Warm
3 : Natural
35
Advertisement
Table of Contents
