LG BX401C Owner's Manual page 6

Safety Instructions
Using
Never touch the wall outlet when
there is leakage of gas, open the
windows and ventilate.
It can cause a fire or a burn by a
spark.
Always open the lens door or remove the lens cap when the projector lamp is on.
Using
Do not place heavy objects on
top of projector.
This may cause mechanical failure or
personal injury!
Do not use any sharp tools on the projector as this will damage the casing.
Cleaning
Do not use water while cleaning
the projector
This may cause damage to the
projector or an electric shock hazard.
Cleaning
Contact the Service
Center once a year to
clean the internal
parts of the projector.
Accumulated dust can
cause mechanical failure.
Others
Do not attempt to service the projector yourself. Contact your dealer or service centre.
This may cause damage to the projector and could give an electric Shock as well as invalidating the warranty !
Others
Be sure to unplug if the projector
is not to be used for a long peri-
od.
Accumulated dust may cause a fire
hazard or damage to the unit!
Only use the specified type of battery.
This could cause damage to the remote control.
6
Do not drop the projector or allow
impact shock.
This may cause mechanical failure or
personal injury !
Take care not to impact the lens
particularly when moving the
projector.
In the unlikely event of smoke or
a strange smell from the projector,
switch it off , unplug it from the
wall outlet and contact your
dealer or service centre.
This may cause a fire or an electric
shock hazard or damage to the unit!
When cleaning the plastic parts such as projector case, unplug the power and
wipe it with a soft cloth. Do not use cleanser, spray water or wipe with a wet
cloth. Especially, never use cleanser (glass cleaner), automobile or industrial
shiner, abrasive or wax, benzene, alcohol etc., which can damage the
product. Use an air spray or soft cloth that is moist with a neutral detergent
and water for removing dust or stains on the projection lens.
It can cause fire, electric shock or product damage (deformation, corrosion and damage).
Refer lamp servicing to qualified
service personnel.
WARNING
Don't look at laser beam directly
as it can cause eye damage!
NOTES
Do not touch the lens of the pro-
jector. It is delicate and easily
damaged.
WARNING
Use an air spray or soft cloth that
is moist with a neutral detergent
and water for removing dust or
stains on the projection lens.
NOTES
WARNING
NOTES
Do not mix new batteries with old
batteries.
This may cause the batteries to over-
heat and leak.