Gigabyte Z690 AORUS TACHYON User Manual page 28

10) LED_C1/LED_C2 (RGB LED Strip Headers)
The headers can be used to connect a standard 5050 RGB LED strip (12V/G/R/B), with maximum power
rating of 2A (12V) and maximum length of 2m.
Connect one end of the RGB LED strip extension cable to the header and
the other end to your RGB LED strip. The black wire (marked with a triangle
on the plug) of the extension cable must be connected to Pin 1 (12V) of this
header. The 12V pin (marked with an arrow) on the other end of the extension
cable must be lined up with the 12V of the LED strip. Be careful with the
connection orientation of the LED strip; incorrect connection may lead to the
damage of the LED strip.
For how to turn on/off the lights of the LED strip, please navigate to the "Unique Features" page
of GIGABYTE's website.
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
11) NOISE_SENSOR (Noise Detection Header)
This header can be used to connect a noise detection cable to detect the noise inside the case.
For more information on the noise detection function, please navigate to the "Unique Features"
page of GIGABYTE's website and search for "System Information Viewer."
Before connecting the cable to the header, make sure to remove the jumper cap; re-place the
jumper cap if the header is not in use.
DEBUG
PORT
DEBUG
PORT
1
LED_C1
1
LED_C2
1
Noise Detection
Cable
1
- 28 -
Pin No. Definition
1 12V
2 G
3 R
4 B
RGB LED
Strip
1
12V
Pin No. Definition
1 Noise Detection
2 GND