Table of Contents
Advertisement
2.5
Connecting AC Adapter (Charging)
The battery is charged by the printer's built-in charger.
Caution
Please stop charging immediately if an abnormal charge is generated.
1. Please connect the AC cable with the
AC adapter, and connect the AC plug to
an outlet.
2. Please hook up the jack cover to open.
Insert DC output terminal of AC
adapter into the AC adapter jack.
3. When the charge starts, the LED turns
red, and when the battery is fully charged, the LED turns off.
Please refer to chapter 4.3 for the LED display of charging status.
4. Please hang the hook of the jack cover
to the hole of AC jack, and push center
of the jack cover to close.
Important
When the printer power supply is turned on, it is not able to charge.
2 Preparation to Print
AC cable
AC adapter
AC adapter
Jack
<Side view＞
(2)
Jack
Cover
(1)
21
Advertisement
Table of Contents
