Setting The Date Manually; Setting Time Offset; Setting Automatic Updates For The Time And Date; Energy Economy - Motorola MTP3150 Feature User Manual

4.7.8.4

Setting the Date Manually

When and where to use:If the date cannot update automatically through the infrastructure.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Time & Date→Set→Set Date.
3 Enter current date using Navigation keys or keypad.
4 Press Done.
4.7.8.5

Setting Time Offset

Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Time & Date→Set→Time Offset.
3 Enter time offset using Navigation keys.
NOTICE: You can adjust the offset value, with 15 minute steps, up to 14 hours ahead or
behind.
4 Press Done.
4.7.8.6

Setting Automatic Updates for the Time and Date

Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Time & Date→System Update.
3 Select one of the following options:
• Off – All the infrastructure information are ignored. The radio uses internal time and offset.
• Time Only – Time displayed is calculated from the offset programmed by your service
provider added or subtracted from the infrastructure time.
• Time & Offset – Time and offset are updated after receiving from the infrastructure.
4.7.9

Energy Economy

Energy Economy (EE) is a mode of operation to save battery life. Your radio does not monitor all
downlink time slots of the Main Control Channel. If the radio is in the charger, Energy Economy mode
is not needed.
4.7.9.1

Enabling or Disabling Energy Economy

Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Energy Economy→EE Selection.
68015000797-EH
Chapter 4: Main Menu
97