Electrolux ERZ45800 User Manual page 28

28 electrolux
1 Rear edge
2 Front edge
3 Right hand side panel
• Apply spacers to the hinges before instal-
ling the appliance into the cabinet . See
picture.
• Rest the panels against the appliance.
• Fit the rear brackets, taking into account
the thickness of the panels (maximum
width of unit 900 mm).
• For a correct alignment make sure that the
distance between the appliance and the
cabinet is of 45 mm.
• Secure the panels at the front.
• Fix the squares (contained in the bag) to
the lower part of the door (references al-
ready provided).
• If necessary, door opening agle max 90°
can be obtained by introducing the pivots
supplied separately. See picture.
Adjustment panels ( if necessary)
• Close the door and check that the small
door is positioned at the required height,
operating the adjustment screws if neces-
sary.
• Use the same screws for vertical alignment
of the small doors.
• If necessary, carry our horizontal alignment
by shifting the small doors.
• After aligning the doors, tighten the nuts of
the brackets and the screws of the small
bracket.