Electrolux ERZ45800 User Manual page 27

Climate Ambient temperature
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Electrical connection
Before plugging in, ensure that the voltage
and frequency shown on the rating plate cor-
respond to your domestic power supply.
The appliance must be earthed. The power
supply cable plug is provided with a contact
for this purpose. If the domestic power sup-
ply socket is not earthed, connect the appli-
ance to a separate earth in compliance with
current regulations, consulting a qualified
electrician.
The manufacturer declines all responsibility if
the above safety precautions are not ob-
served.
This appliance complies with the E.E.C. Di-
rectives.
Height adjustment
The height of the appliance is adjustable from
820 to 870 mm to fine up with existing kitch-
en units.
Before installing the appliance between units,
adjust the height of the feet and rear wheels.
The wheels are factory set for a height of 820
mm. To align the appliance to a height of 870
mm, raise it by adjusting the feet with a span-
ner, then remove the wheels and refit them
in the lowest position.
Fitting the side panels
• Fit the brackets onto the panels in the po-
sitions shown in the diagram. The dimen-
sion of 260* mm is allowed for fitting a 100
mm plinth below the panel. For different
plinth sizes, increase the dimension of
260* mm accordingly.
electrolux 27