Basic And Common Operations; Operating On The System - JVC SP-UXDAB11 Instructions Manual

Basic and Common Operations

Operating on the System

To
Turn on or off (standby)
the power
Changing the display
brightness
Set the Save Mode
Enhance the sound
(Sound Turbo)
Select a source
Adjust the volume
NOTE
DO NOT turn off (standby) the
System with the volume set to an
extremely high level; otherwise, the
sudden blast of sound can damage
your hearing, the speakers and/or
the headphones when you turn on
the System or start playback.
STANDBY lamp
Using Headphones
Be sure to turn down the volume
before connecting or putting on
the headphones.
• Connecting the headphones will
deactivate the speakers.
5
The STANDBY lamp on the System turns off/on.
Press when the System is turned on.
To cancel, press again.
Press and hold for more than 2 seconds when the System is on standby.
• Setting the Save Mode allows you to reduce power consumption by
turning the display off while on standby.
To cancel, press and hold for more than 2 seconds again.
The S. TURBO indicator lights up on the display.
To cancel, press again.
See "Playing Back a Disc/USB Mass Storage Class Device" on page 7.
See "Listening to the Radio" on page 10.
See "Listening to a Digital Audio Player" on page 14.
You can adjust the volume level from level 0 (VOL MIN) to level 31 (VOL
MAX).
PHONES jack
Stereo mini plug cord
Press
Point at the remote sensor on the
front panel. (The operating range
is approx. 7 m.)