Time Id To Adjust The Time Function; Auto Sleep - LG M208WA User Manual

TIME ID to adjust the time function

Time
Clock
Off time
On time

Auto sleep

Clock This function is used to set up of current time.
You must set the time correctly before using On/Off time function.
1) Press the MENU button and then use
2) Press the
3) Press
4) Press
The default value is -- : --.
5) Press the OK/MENU button to save.
The Off time automatically switches the set to off mode at the pre-set time.
Off/On time
1) Press the MENU button and then use
2) Press the
3) Press the
4) Press the
5) Press the
6) Only On time function; Press the
and programme number.
7) Press the OK/MENU button to save.
If Auto sleep is active and there is no input signal, the set switches to off mode
Auto sleep
automatically after 10 minutes. ( It is not working in PC)
1) Press the MENU button and then use
2) Press the
3) Press the OK/MENU button to save .
• In the event of power interruption (disconnection or power failure), the Clock must be reset.
Note
• Two hours after the set is switched on by the On time function it will automatically switch
back to off mode unless a button has been pressed.
• Once the On or Off time is set, these functions operate daily at the preset time.
• Off time function overrides On time function if they are set to the same time.
• The set must be in off mode for the On time to work.
• On time will move on to auto off if no activity is received in 2hours after setting the On time.
Adjusting the Screen
-- : --
OK MENU
button and then use
button and then use
button and then use
button and then use
button and then use
button and then use
button and then use
button and then use
37
button to select the TIME menu.
button to select the Clock menu.
button to set the hour(00~23).
button to set the minutes(00~59).
button to select the TIME menu.
button to select Off time or On time.
button to set the hour(00~23).
button to set the minutes(00~59).
button to select On or Off.
button and then button to adjust volume level
button to select the Auto sleep menu.
button to select On or Off.