Table of Contents
Advertisement
2.1
Assembling the monitor arm/base
To assemble the monitor base:
1.
Have the front of the monitor face down on a table.
2.
Attach the base into the arm, making sure the tab on the arm fits into the groove
on the base.
3.
Fix the base to the arm by fastening the bundled screw.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2.2
Adjusting the monitor
•
For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
•
Hold the stand to prevent the monitor from falling when you change its angle.
•
The recommended adjusting angle is +33˚ to -5˚ (for tilt).
It is normal that the monitor slightly shakes while you adjust the viewing angle.
ASUS MG248QE Series LCD Monitor
2-1
Advertisement
Table of Contents
