BenQ WDC10 Instruction page 2

How to access Web Management?
Equipment:
o
Laptop or PC.
o
Network cable (RJ45).
o
Target units, InstaShow Hosts and Buttons.
Follow below steps:
1. Connect InstaShow Host (RX) directly to laptop using network cable (RJ45).
2. Connect power source to InstaShow Host (RX) using a USB A to micro USB B cable.
3. Wait until the LED indicator on your InstaShow Host lights up static green.
4. Turn off the Wi-Fi of your laptop or PC.
5. Change laptop's IP address to 192.168.20.X (e.g. 192.168.20.100).
2
Instruction
BenQ Corporation