Setting up
Be careful of the following
Be careful to make sure children not to put their hands or any objects into the
*speaker duct.
*speaker duct : A hole in speaker cabinet (enclosure) that gives plentiful bass
sound.
6
Put the battery in the remote control
Make sure that the + (plus) and -
(minus) on the battery (size AAA)
match those on the remote control.
1
1 Connect the speaker cables to the player
Cables from the left-hand speaker connect to the terminal marked L
(left) + (plus) and - (minus). Cables from the right-hand speaker are
connected to the terminal marked R (right) + (plus) and - (minus).
To connect the cable to the player, press each of the four square plastic
finger pads on the rear of the player. The connector will open ready to
receive a cable.
2
2 Fit the AM loop aerial to its stand
Connect the AM loop aerial to the player.
3 Connect the FM aerial
3
The reception will be at its best when the two loose ends of the aerial
are in a straight line and horizontal.
4
4 Connect the DAB aerial
Place it to the place where strong signals are received.
5
5 Plug the power plug into a wall socket
Speaker decoration
This part of the device is made
just for design attraction.