Usb Direct Recording; Setting The Clock; Use Your Player As An Alarm Clock - LG FA163DAB Manual

USB direct Recording

Record FM, AM or PORTABLE source to USB
Connect USB to the player before recording.
1. Select a mode (PORTABLE, FM or
AM) in which you want to record:
2. Start the Recording:
3. To stop a Recording:
Record CD source to USB
You can record one desired track or all of the music tracks in CD to USB.
1. Select the CD function:
2. Select the track:
3. Start the Recording:
4. To stop a Recording:
NOTES :
• If removing the while recording, the recorded file may not be saved.
• Press USB Rec. on the player or REC on the remote control for longer than 3
seconds, you can select bit rate. Press ./> to select the bit rate and
USB Rec. or REC again to select the recording speed. Press ./> to
select a desired recording speed and USB Rec. or REC again to finish record-
ing.
X 1 SPEED (96kbps, 128kbps, 192kbps, 256kbps)
- You can listen to music while recording it.
X 2 SPEED (Only 96kbps, 128kbps)
- You can just recording the music file. (Only Audio CD)
• When you select CD function, and then press USB Rec. on the player or REC
on the remote control as not selecting any tracks, all music files in CD are
recorded.
• Set programs by using PROGRAM/MEMO and press USB Rec. on the player
or REC on the remote control, you can record desired songs on CD in order.
• When set sleep mode to on, recording stops at the previously set time and
then the player is turned off.
• For sources of DAB radio/iPod, recording is not supported.
10
1. Press for at least 2 seconds:
2. Choose from either: AM 12:00 (for an am and pm dis-
ON PLAYER ON REMOTE
FUNC. FUNCTION
3. Confirm your selection:
or INPUT
4. Select the hours:
USB Rec. REC
5. Press:
x x x x
6. Select the minutes:
7. Press:
ON PLAYER ON REMOTE

Use your player as an alarm clock

FUNC. FUNCTION
Press and hold TIMER on the player for two seconds. Each function, TUNER,
./> ./>
DAB, CD, USB flashes for two seconds. Press SET on the player when the
function you want to be woken by is showing.
USB Rec. REC
If you choose TUNER you will be shown the stations you have saved as pre-
x x x x
sets. Use ./> on the player to select the station you want, then press SET
on the player.
You will be shown the ON TIME display. This is where you set the time you want
the alarm to go off. Use ./> on the player to change the hours and min-
utes and SET on the player to save.
You will then be shown the OFF TIME display. This is where you set the time
you want the function to stop. Use ./> on the player to change the hours
and minutes and press SET on the player to save.
Next you will be shown the volume (VOL) you want to be woken by. Use
./> on the player to change the volume and SET on the player to save.
Switch the system off. The clock icon shows that the alarm is set.
When the system is turned off you can check the time the alarm is set for by
pressing TIMER on the player. You can also turn the alarm on and off by press-
ing TIMER on the player. To set the alarm to go off at a different time, switch the
system on and reprogram following the same steps as initially.
NOTE :If you select DAB in setting the TIMER, the last broadcasted channel is
selected automatically.

Setting the Clock

play) or 0:00 (for a 24 hour display)
ON PLAYER
CLOCK
./>
SET
./>
SET
./>
SET