Operating Instructions - Saturn FBGM12-B Instruction Manual

Glass door merchandisers (swing and sliding door)
Table of Contents

Advertisement

Operating Instructions

1. New, upright air-cooling refrigeration units should
be opened and ventilated before first use. After
ventilation, the interior should be cleaned with
warm water before use.
2. After connecting the power supply, press the GREEN power switch to turn
on the unit. The light should illuminate and the refrigeration unit's power
will turn on. The microcomputer controller, installed in the controller
keyboard, can automatically adjust the temperature ranges. This intelligent
digital controller works as follows: If the temperature increases and
reaches set point plus differential, the compressor is started and then
turned off when the temperature reaches the set point value again.
Front Panel
Commands–Digital Display
© Saturn 2014
To display target set point, in programming mode it
selects a parameter or confirm an operation
Press to start a manual defrost
Use to browse the parameter codes, or increase the displayed
value in programming mode
Use to browse the parameter codes, or decrease the displayed
value in programming mode
Key Combinations
Press together to lock or unlock the keyboard
Press together to enter in programming mode
Press together to return to room temperature display
Version 2 | September 2014 | Glass Door Merchandiser
Page 8

Advertisement

Table of Contents
loading

Related Products for Saturn FBGM12-B

Table of Contents