Table 24 Tbkon, Tbke (Timer Backup On, Timer Backup/Normal Enable); Table 25 Tmpin Bit (Timer Pin); Table 26 Tstp Bit (Timer Stop) - Epson RX4111CE Applications Manual

6) TBKON, TBKE bit
This function selects the operation time with the main power supply or the operation time with the backup power
supply. The count value is added.

Table 24 TBKON, TBKE (Timer Backup ON, Timer Backup/Normal Enable)

operation
Write
7) TMPIN bit
The timer interrupt output can be assigned to the /INT or FOUT pin. Since it is an OR output with the FOUT setting,
please set the FOUT output setting to FSEL 1, 0 = (1, 1) and OFF the frequency output function.

Table 25 TMPIN bit (Timer PIN)

TMPIN
Write
8) TSTP bit (Timer Stop)
This bit is used to stop Wake-up timer count down.

Table 26 TSTP bit (Timer STOP)

TE
1
0
RX4111CE
ETM62E-02
TBKE TBKON
0 X This setting counts normal mode and backup mode.
0 This setting counts it at time of normal mode (V
1
1 This setting counts it at time of backup mode (V
Data
0 Assign output to / INT pin
1 Assign output to FOUT pin
STOP TBKE TSTP
0
0
0
1
1 X
1 X X
X X X
Seiko Epson Corporation
Description
Description
Description
Writing a 0 to this bit cancels stop status (restarts
timer counts down).
The reopening value of the countdown is a
stopping value
Count stops.
TSTP is invalid. and the countdown doesn't stop
even if set in TSTP = 1.
The count stops at the time of the setting of 64 Hz,
1 Hz,1/60 Hz.
It doesn't start counting
14. How to use

operation)
DD
operation)
BAT
Jump to Top / Bottom
29