Watching video
2
SLEEP
DISPLAY
GUI MODE
3
6
Refer to the operating instructions
supplied with the TV and VCR.
1
Turn on the VCR.
2
Turn on the receiver.
3
Press INPUT SELECTOR U/u to select
"VIDEO 1"*.
You can also use INPUT SELECTOR on this receiver to
select "VIDEO 1"*.
* When you connect VCR to the VIDEO 1 jack.
4
Switch the input of the TV so that an image
of the VCR is displayed.
5
Play back the tape on the VCR.
6
Adjust to a suitable volume.
7
After you have finished watching a video,
eject the tape and turn off the receiver, the
TV, and the VCR.
6
3
US
55