Breville the AirRounder Plus LPH708 Instruction Book page 20

3. Remove all packaging from the replacement
filter then place into the purifier fan heater
with pull tabs facing the opening (Fig 9).
Fig. 9
4. Ensure the filter is correctly fitted.
5. Replace the rear housing cover (Fig 10).
Fig. 10
6. Press and hold the
control panel for 10 seconds to reset the
filter. REPLACE FILTER icon will no longer
illuminate on the LED display panel.
20
LPH708_ANZ_IB_B21_FA.indd 20 LPH708_ANZ_IB_B21_FA.indd 20
button on the
NOTE
There is no top or bottom on the filter. The
filter can be placed into the unit either way.
NOTE
If the filter is not in place or not fitted correctly,
the purifier fan heater will not operate.
REPLACEMENT FILTERS
Replacement filters must be purchased from
the Breville website^ or at participating retail
outlets.
See the table below for the replacement
product code to suit this Breville
Purifier Fan Heater.
Breville Purifier Fan
Heater Model No.
the AirRounder™
Connect
LPH408WHT
the AirRounder Plus™
Connect
LPH708WHT
^Delivery charges may apply.
Please contact Breville Customer Service
Centre for further support.
Only use the original Breville filter specially
intended for this appliance. Do not use any
other filters.
STORAGE
When not in use, store the purifier fan heater
upright in a cool, clean and dry location.
Filter Replacement
Product Code
LPH040WHT
LPH070WHT
29/1/21 11:04 am 29/1/21 11:04 am