Advertisement
Quick Links
John Lewis
Double
King size
Thank you for purchasing this Jamie Bed. Please read the instructions carefully before use to ensure safe
and satisfactory operation of this product.
PRE-ASSEMBLY PREPARATION
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of components is
given in this leaflet. If any components are missing, please contact the John Lewis Helpline.
This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN
LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 40 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
If you require any additional information or have any issues with this product please call the
John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com
Jamie Bed
Not included in hardware list
1/6
Stock Code :
Stock Code :
For product support or spare parts please call
the John Lewis Helpline;
E: mail@fwgroup-uk.com
803/43701
803/43702
T: 01244 689949
Advertisement
Related Manuals for John Lewis Jamie Bed 803/43701
Summary of Contents for John Lewis Jamie Bed 803/43701
- Page 1 Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact the John Lewis Helpline. This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
- Page 2 Fittings and parts checklist Fittings M4 Allen Key x 1 Nut M8 x 2 M5 Allen Key x 1 Screw 3.5 X 30mm x 2 Centre Caps x 15 Spanner M13 x 1 Side Caps x 30 Spring Washer M8 x 2 Screw 3.5 X 18mm x 2 M6 X 25mm Bolt x 6 Parts...
- Page 3 Step by step assembly instructions Step One Hook the pre-attached metal fixing on the Side Rails (3) over the pre-inserted bolts in the Headboard (1) and Footboard (2) and hand-tighten to loosely secure parts together. Do not tighten with M5 Allen Key (B) until you have inserted the Centre Rail in the next step.
- Page 4 Step Three Insert the Front Legs (6) into the pre-drilled holes in the underside of the Headboard (1) and twist to secure, as shown in the diagram below. Legs x 2 Step Four Attach Metal Plate (7) and Wooden Leg (6) together as shown in Step 1. Make sure the arrow on the metal plate and wooden leg line up.
- Page 5 Step Five With the curved side facing upwards, Insert 2 Slats (4) into a Centre Cap (C) followed by a Side Cap (D) onto the other end of both Slats. Use your palms to push down the Side Caps into the Side Rails and Centre Caps to the Centre Rail as shown in diagram below.
-
Page 6: Care And Maintenance
Please be careful to retain all fittings when doing this. If you require any additional information or have any issues with this product please call the John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com John Lewis Partnership 171 Victoria Street, London, SW1E 5NN.