Roland EV-1-WL Connection Manual page 2

Connecting the EV-1-WL to a
Mac
1.
Turn the EV-1-WL and the Mac on.
2.
Make sure that the Bluetooth indicator
on the EV-1-WL is blinking blue.
If the indicator is blinking white or is lit up blue,
operate the device as shown below to make the
indicator blink blue.
Blinking
white
Lit blue
3.
Press the [Bluetooth] button on the
EV-1-WL.
The unit enters pairing mode, and the Bluetooth
indicator on the EV-1-WL rapidly blinks blue.
4.
On your Mac, open Audio MIDI Setup.
Quickly press the [Bluetooth] button twice
on the EV-1-WL.
The unit is connected to a different device.
Disconnect on the connected device side,
or long-press the [Bluetooth] button on
the EV-1-WL.
2