Advertisement
Quick Links
MAGICSTREAM
DECK JET II WATER FEATURE
Kit Contents (P/N 580003)
Deck Jet Body — (Qty. 4)
Nozzle Kit (P/N 590041) — (Qty. 4)
Deck Jet Cover (P/N 990042) — (Qty. 4)
Note: Each kit contains parts for four (4) MagicStream
Deck Jet II units.
INSTALLATION INSTRUCTIONS
WARNING — FOR YOUR SAFETY: This product must be installed and serviced by
a pool service professional. The procedures in this manual must be followed exactly.
Improper installation and/or operation will void the warranty. This document gives
instructions for installing the MagicStream
instructions completely before starting the procedure.
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
®
Rainbow Pool Products
PO Box 2388, Mansfield Qld 4122
Telephone STD 61-7-3849 5385
Facsimile STD 61-7-3849 5384
Email: info@rainbowpoolproducts.com.au
Web: www.rainbowpoolproducts.com.au
SAVE THESE INSTRUCTIONS
®
Deck Jet II water feature. Read through the
®
Advertisement
Related Manuals for Pentair MagicStream Deck Jet II
Summary of Contents for Pentair MagicStream Deck Jet II
- Page 1 MAGICSTREAM ® DECK JET II WATER FEATURE Kit Contents (P/N 580003) Deck Jet Body — (Qty. 4) Nozzle Kit (P/N 590041) — (Qty. 4) Deck Jet Cover (P/N 990042) — (Qty. 4) Note: Each kit contains parts for four (4) MagicStream ®...
- Page 2 Overview The MagicStream Deck Jet II water feature is designed to be installed in the deck or landscaping ® surrounding the pool, spa, fountain, or pond. The swivel nozzle (Figure 1) produces a 5/16” stream of water. The body is equipped with two, 3/16” drain holes to allow water to drain from the cup surrounding the nozzle into the drain cavity at the base of the body (Figure 1).
- Page 3 Installation The MagicStream ® pipe (Figure 2). After the pipe is pressure tested, solvent weld the body to the 3/4” supply pipe. . Anchor the MagicStream Deck Jet II body, with the cover attached, ® NOTE: Use PVC/ABS glue only that supplies the MagicStream Deck Jet II water feature.