Detecto solo Series Owner's Manual page 28

(Automatic Shutoff)
The display will show
displayed is acceptable, press the
Otherwise, press the
save it and proceed to the next prompt.
Allowable values are 00 to 09 minutes in 1-minute increments. Note that selecting 00
disables the automatic shutoff feature. The default Automatic Shutoff setting is
(3 minutes).
NOTE: The Automatic Shutoff function will not be active when in the calibration mode.
(Buzzer Setting)
During operation, if an incorrect key is pressed, the scale will sound two beeps as a
warning and the operation will not be processed.
The display will show
acceptable, press the
will be saved, and the scale will automatically turn off.
Otherwise, press the
save it. All scale setup settings (current or new values) will be saved, and the scale will
automatically turn off.
Allowable values are 0 (disable) or 1 (enable).
NOTE: The default Buzzer setting is 1 (enable).
24
SCALE SETUP, CONT.
, the current Automatic Shutoff setting. If the value
or keys to select a new value, and then press the
, the current Buzzer setting. If the value displayed is
key to save it. All scale setup settings (current or new values)
or keys to select a new value, and then press the
0044-0391-0M Rev F solo Series Owner's Manual
key to save it and proceed to the next prompt.
key to
key to