Anti Motion Blur - Sony DSC-TX1 Cyber-shot&reg Handbook

Anti Motion Blur

This is suitable for indoor shots without using the flash to reduce the subject blur.
1 Lower the lens cover to switch to shooting mode.
2 (REC Mode) t
3 Press the shutter button fully down.
A burst of shots are taken, and image processing is applied to
reduce subject blur and noise.
Notes
• The shutter beeps 6 times, however just one image is recorded.
• Noise is not effectively reduced in the following situations:
– Image with large-scale movement
– Image with a main subject too close to the camera
– Image with little contrast such as sky, sandy beach, or lawn
– Image with constant change such as waves or water falls
• Smile Shutter cannot be used.
• When using a light source that flickers, such as fluorescent lighting, block noise may occur. In such
cases, set Scene Selection to
(Anti Motion Blur)
(High Sensitivity).
27 GB