Changing Oven Light; General Cleaning - Frigidaire FGB557CESD Owner's Manual

Frigidaire fgb557cesd: user guide
Hide thumbs Also See for FGB557CESD:
Table of Contents

Advertisement

General Cleaning

Storage Drawer
The drawer can be removed to facilitate cleaning under the wall oven. Use care when handling the drawer.
Storage or Broiler Drawer
Flammable materials should not be stored in an oven or in the storage or broiler drawer or compartment (if equipped). This
includes paper, plastic and cloth items, such as cookbooks, plasticware and towels, as well as flammable liquids. Do not store explosives,
such as aerosol cans, on or near the appliance. Flammable materials may explode and result in fire or property damage.

Changing Oven Light

The oven light automatically turns on when the door is opened. Use the rocker switch located on the control panel to
turn the oven light on or off when the door is closed.
Be sure the oven is unplugged and all parts are COOL before replacing the oven light. Wear a leather-faced glove for protection against
possible broken glass.
To Change the Oven Light
1.
Turn electrical power off at the main source or unplug the oven.
2.
Press wire holder to one side to release the glass shield (some models).
3.
Replace bulb with a new 40 watt appliance bulb.
4.
Replace glass shield in socket and snap wire holder into place (some models).
5.
Turn power back on again at the main source (or plug the oven back in).
6.
The clock (if equipped) will then need to be reset. To reset, see Setting the Clock and Minute Timer
in this Owner's Guide.
(continued)
Broiler Drawer
(self-Clean Models) or
To Remove the Storage or Broiler Drawer
1. Open and empty the drawer of all utensils.
2. Pull drawer out to drawer stop.
3. Tilt the drawer down and pull it out over the rollers. Or, tilt the drawer up and pull it out over
the rollers (larger storage drawer models only).
To Replace the Storage or Broiler Drawer
1. Insert the rear end of the drawer into the opening.
2. Fit the end rollers onto the guide rails.
3. Hold the drawer in a horizontal position, then push in. Or, push the drawer in until it stops, then
lift to allow the rollers to clear the roller guide stop and push in (larger storage drawer models
only).
( Non Self-Clean Models)
11

Advertisement

Table of Contents
loading

Table of Contents