Canon ImagePrograf PRO-6100 Setup Manual page 10

6
Install the print head.
● Align the print head so that the area enclosed by a circle in the
diagram is facing you, and carefully push the print head firmly
into the printer, ensuring that the part covered by the protective
caps does not touch the carriage.
8
Push the print head lock lever all the way to the end.
●
Push firmly until you hear a click sound.
7
Pull the print head locking cover down toward you to lock
the print head in place.
9
Close the top cover.
Note
●
If the roll unit is installed, the roll unit calibration starts automatically
after the print head is attached.
If the roll holder is mounted on the roll unit at this time,
calibration cannot be executed. Do not mount the roll holder on
the roll unit until the setup has finished.
9