BenQ T3300v Quick Manual page 21

Annot
Text
1. Touch Annot. A virtual keyboard and a text cursor (I-beam) appear at the text home position.
2. Type the texts directly. Touch anywhere on the imaging area to finish inputs.
3. Drag the text cursor to where you want the new texts to be, and release it to place the texts.
Setting the Text Home Position
You can choose a specified position in the image display as the starting location, which is the text
home position.
1. Drag a set of annotated texts to the desired text home position.
2. Touch the texts directly, then touch
3. Touch Set home.
Label
1. Touch Label. A predefined text menu appears at the control panel area
2. Select a text label to place it at the text home position, and touch Close.
3. Drag the label to where you want the texts to be, and release it to place the label.
NOTES
• The annotated texts or text labels are still editable. Touch a set of texts to display the virtual
keyboard, and start editing the texts. Touch anywhere on the imaging area to finish editing.
• To restore the annotated texts or text labels to the default text home position, simply touch a set of
texts, touch
Body Mark
1. Touch BDMK to display the body mark menu.
to close the keyboard, then touch
to close the keyboard.
Go home.
21