Panasonic ER1511 Operating Instructions Manual page 6

Cleaningtheblade
Clean the clipper and the blade after each use.
1.Brushoff 2.Removethe
anyhairs bladeand
fromthe brushoff
clipperand thehairs
fromaround fromthe
theblade. bladeedge.
Lubrication
1.Applyadropoftheoilto
eachindicatedpoint.
•
Apply the oil to the clipper
before and after each use.
2.Setthedialto"2.0"and
thenremounttheblade
ontheclipper.
6
ER1511_ASIA.indb 6
3.Brushthehairsoutfrom
betweenthestationary
bladeandthemoving
bladewhilepressing
downonthecleaning
levertoraisethemoving
blade.
Removingthebuilt‑inrechargeablebatteries
1. Remove the blades  and four screws .
. Remove the spring , the under cover , and the blade holder .
3. Remove the dial  and open the housing , and then take out
two batteries .
•
Disconnect the clipper from a household outlet.
• Discharge the batteries completely before removing them.
•
Be careful not to short‑circuit the batteries.





WARNING ‑ Do not attempt to replace the batteries for the
purpose of reusing the clipper. This could result in the risk of fire
or electric shock.
Importantnoticeregardingenvironmentalprotection
The built‑in rechargeable Nickel‑Metal Hydride batteries contain
substances that may be environmentally harmful. Please remove
the batteries before discarding your clipper.
Forenvironmentalprotectionandrecyclingmaterials
This clipper contains Nickel‑Metal Hydride batteries.
Please make sure that the batteries are disposed of at an
officially assigned location, if there is one in your country.



2012/02/28 16:47:19