KAL-FIRE Heat Pure 45 Quick Start Manual page 3

Igniting the Heat Pure 45, 60, 70, 71, 85, 100, 105, 110 and 120
Place a couple of large logs on the
base of the appliance and one large
log against the rear wall. Place two
logs diagonally on top. Put some
firelighters on the logs.
Ignite the firelighters using a long
match. Leave the door slightly open
(1-2 cm) for a couple of minutes.
Tips
• Use enough wood to ignite the Heat Pure:
- Heat Pure 45
- Heat Pure 70
- Heat Pure 60 and 85
- Heat Pure 71, 100, 105, 110 and 120
• When the fire has been lit, leave the door slightly open (1-2 cm) for 3-10 minutes; the wood will catch fire
more easily and the flue will be quickly warmed-up.
Do not use white spirits, petrol, oil or other liquid fuels.
.
Place some finely chopped wood
onto the logs. Open the air regulation
completely (position on the extreme
right).
When there is a glowing bed,
distribute the glowing ashes using a
poker. Now add more wood and
leave the door slightly open, so that
the wood will catch fire. Then close
the door.
approx. 2 kg
approx. 3 kg
approx. 4 kg
approx. 6 kg