3-D Tones - Nokia N82 User Manual

To change the profile, select a profile, and
Activate. To also change the profile, press the power
key in the standby mode. Scroll to the profile you want
to activate, and select OK.
Tip: To switch between the general and silent
profiles in the standby mode, press and hold #.
To modify a profile, scroll to the profile, and select
Options > Personalise. Scroll to the setting you want
to change, and press the scroll key to open the choices.
Tones stored on a compatible memory card (if
inserted) are indicated with
In the tones list, select
service) to open a list of bookmarks. You can select a
bookmark and start connection to a web page to
download more tones.
If you want the caller's name to be spoken when your
device rings, select Options
Say caller's name to On. The caller's name must be
saved in Contacts.
To create a new profile, select
new.

3-D tones

Press , select Tools
96
Options
.
Download sounds (network
> Personalise, and set
Options Create
>
Utilities 3-D tones.
> >
With 3-D tones, you can enable three-dimensional
>
sound effects for ringing tones. Not all ringing tones
support 3-D effects.
To enable the 3-D effects, select
effects > On. To change the ringing tone, select
Ringing tone and the desired ringing tone.
To change the 3-D effect that is applied to the ringing
tone, select Sound trajectory
To modify the effect, select from the following
settings:
Trajectory speed
●
speed at which sound moves from one direction to
another. This setting is not available for all ringing
tones.
Reverberation
●
To listen to the ringing tone with the 3-D effect, select
Options Play tone. If you enable the 3-D tones but
>
do not select any 3-D effect, stereo widening is applied
to the ringing tone.
To adjust the ringing tone volume, select
Profiles Options
>
volume.
3-D ringing tone
and the desired effect.
— Scroll left or right to adjust the
— Select the type of echo.
Personalise Ringing
> >
© 2007 Nokia. All rights reserved.
Tools
>