Storing Specific Tracks (Delete Bank); Grouping Discs (Group File) - Sony CDP-CX235 Operating Instructions Manual

Storing Specific Tracks
(Delete Bank)
You can delete unwanted tracks and store only the
tracks you want. When you select the disc containing a
Delete Bank, you can play only the remaining tracks.
CONTINUE SHUFFLE
1
Press CONTINUE or SHUFFLE before you start
playing.
2
Turn the JOG dial to select the disc.
3
Press CHECK repeatedly until the track you want
to delete appears in the display.
ALL DISCS
CD1
DISC TRACK
2 0 1
4
Press CLEAR.
"DELETE FILE" and "OFF" appear in the display.
ALL DISCS
CD1
DISC TRACK
2 0 1
If you want to recover the track, press CLEAR
again.
5
Repeat Steps 3 and 4 to delete more tracks.
You can recover all the tracks you have deleted
Hold down CLEAR until "ALL ON" appears in the
display.
Note
The deleted tracks are skipped even in the Shuffle or Program
Play mode (when the whole disc containing a Delete Bank is
programmed as one step).
Storing Information About CDs (Custom Files)
JOG
CHECK CLEAR
2 0
O N
DELETE FILE
2 0
O F F

Grouping Discs (Group File)

You might find that too many discs make it hard to
find the disc you want. This player has a feature that
lets you classify discs into eight groups. One disc can
be put into only one group.
Once you classify discs, you can enjoy Continuous,
Shuffle or Repeat Play only within a certain group
(Group Play).
CONTINUE SHUFFLE ≠/±
GROUP 1 – 8 GROUP FILE
Assigning discs to groups
1
Press CONTINUE or SHUFFLE before you start
playing.
2
Turn the JOG dial to select the disc you want to
assign to a group.
3
Press GROUP FILE.
"Select G1 – G8" appears in the display.
4
Press one of the GROUP 1 – 8 buttons to which
you want to put the disc.
"GROUP FILE" and the group number appear in
the display and the disc is assigned to that group.
Labeling groups (Group Memo)
You can change the preset group number to anything
you like, such as a category, using up to 13 characters.
Note that you cannot store the Group Memo if you
have not assigned any disc to the group.
1
Press INPUT.
2
Turn the JOG dial until the group number you
want to label appears in the display, and then push
the JOG dial.
The flashing cursor (") appears.
INPUT
JOG
·
CLEAR
(Continued)
21