Advertisement
Getting Started with the DG-1000
Power on
Turn on the DG-1000 by pressing and holding the power button for 3 seconds until the
green power indicator light turns on. The bootup process may take up to 40 seconds to
complete, and the gauge is ready to be used when the home screen appears (shown
below).
Navigating the home screen
The DG-1000 runs multiple apps which can be launched via the touch screen.
Gauge app
To take measurements, you will need to launch the Gauge App. The DG-1000 will then
directly display the readings on both channels, as shown on page 4 and 5.
Tubing assistant
If you are just getting started or want confidence you set up your equipment correctly,
use the Tubing Assistant App. It asks a few questions and then provides step-by-step
instruction on getting the gauge and tubing set up correctly for the test being run.
Updates
The DG-1000 has a regular cadence of firmware updates which add features and
capabilities to the gauge. Anytime you are connected to Wi-Fi, you can use this to
update and ensure your gauge has the latest software loaded.
Settings
From the home screen, settings provides ability to establish multiple universal settings,
like: Bluetooth
, Wi-Fi, screen brightness, language, factory reset. Note that when in
®
the gauge app, the settings button allows you to establish gauge specific settings as
shown on the following pages.
Power off
In addition to the hard power button on the top, there is a power button on the home
screen.
3
Advertisement
