Advertisement
Quick Links
Advertisement
Related Manuals for TEC DG-1000
Summary of Contents for TEC DG-1000
- Page 1 DG-1000 PRESSURE AND FLOW GAUGE THE ENERGY CONSERVATORY OVERVIEW...
- Page 2 Kit components A standard DG-1000 kit includes • DG-1000 pressure and flow gauge • Carrying case • Two Lithium Ion batteries (installed) • Charger • Parts bag with fan control cable, digital gauge extension tube and plastic hose connectors •...
- Page 3 Getting Started with the DG-1000 Power on Turn on the DG-1000 by pressing and holding the power button for 3 seconds until the green power indicator light turns on. The bootup process may take up to 40 seconds to complete, and the gauge is ready to be used when the home screen appears (shown below).
- Page 4 Gauge app screen overview To learn more about how to use the Gauge app, download the DG-1000 Basic Use Quick Guide at energyconservatory.com/dg1000guides. Gauge serial number Time average Fan speed slider Device area Set baseline...
- Page 5 Battery level Gauge app settings Hold Home screen Network/Bluetooth® Start cruise Speaker Cruise target Mode area Configuration area...
- Page 6 32 degrees F and 105 degrees F. Charging instructions On DG-1000 units with serial numbers 9541 and above, the batteries can be fully charged in about three hours using the included USB Type C charger. When connected to power the green indicator light will illuminate.
- Page 7 Press and hold the power button for 5 seconds to turn off the DG-1000. Wait until all lights are off. Then press the power button. This typically resolves many issues. If that fails to work, press and hold the power button for 5 seconds to turn off the DG-1000.
-
Page 8: Specifications
DG-1000 specifications COMPONENT SPECIFICATIONS No. of Independent Pressure Channels Pressure Range -2,500 to +2,500 Pa (-10 to +10 in. H Display Resolution 0.1 Pa for readings 0 - 999.9 Pa 1 Pa for readings 1000 Pa and larger Accuracy at Typical Use Conditions 0.9% of pressure reading or 0.12 Pa, whichever is... - Page 9 DG-1000 specifications continued COMPONENT SPECIFICATIONS Auto-Off Adjustable from 10 minutes to 2 hours Dimensions 7.0 x 4.2 x 1.4 inches Weight 15.7 oz Calibration Meets ASTM Standard E779-03, E1554-07, CGSB- 149.10-M86, EN 13829, ATTMA Technical Standard 1 and NFPA 2001, RESNET and US ACE...
-
Page 10: Express Limited Warranty
THE ENERGY CONSERVATORY WARRANTY EXPRESS LIMITED WARRANTY Seller warrants that this product, under normal use and service as described in the operator’s manual, shall be free from defects in workmanship and material for a period of 24 months, or such shorter length of time as may be specified in the operator’s manual, from the date of shipment to the Customer. - Page 11 Do not clean the screen with flux, water, acetone, ethanol, isopropyl alcohol, toluene or ammonia (glass cleaner). Introduction The DG-1000 is a two channel low pressure gauge that is intended to be used with equipment manufactured by The Energy Conservatory, or as a manometer.
- Page 12 Automating Tests and Managing Data One of the key advantages of the DG-1000 is its Bluetooth connectivity and simple connection to the TEC AutoTest App for automating testing, data collection and report writing. This is effective for both single point and multipoint testing with ability to share data or a PDF report via email or text, or store it to a storage destination of your choice.