Mercedes-Benz E-Class Coupe Owner's Manual page 303

Flat tyre
300
mends that you use a Mercedes-Benz Service
Centre for this purpose. In particular, work
relevant to safety or on safety-related sys-
tems must be carried out at a qualified spe-
cialist workshop.
Tyre pressure of 180 kPa (1.8 bar/
26 psi) is reached
Press the on/off switch on the tyre inflation
X
compressor to 0.
The tyre inflation compressor is switched
off.
Unscrew the filler hose from the valve of
X
the faulty tyre.
! After use, excess TIREFIT may run out of
the filler hose. This may cause stains.
Therefore, place the filler hose in the plastic
bag which contained the TIREFIT kit.
Stow the tyre sealant bottle, the tyre infla-
X
tion compressor and the warning triangle.
Pull away immediately.
X
G
WARNING
Do not exceed the maximum speed of
80 km/h.
The "max. 80 km/h" label must be affixed in
the driver's field of vision.
The vehicle's handling characteristics may be
affected.
Stop after driving for approximately ten
X
minutes and check the tyre pressure with
the tyre inflation compressor.
G WARNING
If the tyre pressure is less than 130 kPa
(1.3 bar/20 psi), the tyre is too severely dam-
aged. Do not drive any further. Consult a
qualified specialist workshop which has the
necessary specialist knowledge and tools to
carry out the work required. Mercedes-Benz
recommends that you use a Mercedes-Benz
Service Centre for this purpose. In particular,
work relevant to safety or on safety-related
systems must be carried out at a qualified
specialist workshop.
Correct the tyre pressure if it is still at least
X
130 kPa (1.3 bar/20 psi) (for the values,
see the fuel filler flap).
To increase the tyre pressure: switch on
X
the tyre inflation compressor.
TIREFIT kit version 1
To reduce the tyre pressure (version
X
1): open pressure release screw F on
pressure gauge G.
TIREFIT kit version 2
To reduce the tyre pressure (version
X
2): press pressure release button E next
to pressure gauge F.
Stow the tyre sealant bottle, the tyre infla-
X
tion compressor and the warning triangle.
Drive to the nearest workshop and have the
X
tyre changed there.
Have the tyre sealant bottle replaced as
X
soon as possible at a qualified specialist