When The Idling Stop System Does Not Operate Properly; Idling Stop Indicator Does Not Come On - Honda NSC110 2020 Manual

20201028145327_32K2CA000_eng_BOOK Page 98 Wednesday, October 28 2020 15:00:25 JST

When the Idling Stop System Does Not Operate Properly

Idling Stop Indicator Does Not
Come On
When the Idling Stop indicator does not
come on, perform the following.
If the Idling Stop switch is at
Press the Idling Stop switch to
Stop).
If the engine is cold:
Warm up the engine.
The Idling Stop system does not operate
when the engine is cold.
If you did not ride the vehicle after engine
starts:
Ride the vehicle at speeds of over 10 km/h
(6 mph). The Idling Stop system does not
operate until you ride once.
If PGM-FI malfunction indicator lamp (MIL)
lights:
When the PGM-FI malfunction indicator lamp
(MIL) lights, the Idling Stop system does not
operate for protection of the engine. See
your dealer.
(Idling):
If the battery voltage is low:
(Idling
Ride the vehicle awhile, then stop the engine
and then restart the engine with the start
button referring to the starting procedure
( P. 45) for standard engine starting. The
2
Idling Stop system may not operate if the
battery voltage is low.
If this occurs frequently, contact your dealer.
95