LG LW1817IVSM Owner's Manual page 15

4
Before installing the front grille, fold out the
vent control lever located to the left of the
control panel, as shown below.
5
Connect the wire harness before assembling
the front grille.
6
Attach the front grille to the cabinet by
inserting the tabs on the grille into the slots on
the front top of the cabinet.
Push the grille in until it snaps into place.
NOTE
• Guide the lever carefully through the grille as
you push it in.
7
Open and remove the inlet grille from the
product. Secure the front grille assembly with
2 type A screws. Assemble the inlet grille to
the front grille again.
Inlet Grille Inlet Grille
8
After the air conditioner is installed, measure
the curtain panel on each side and cut the
adhesive-backed heatproof foam to fit each
panel. The size of the panels may differ.
Remove the backing from the heatproof foam
and attach the foam to the curtain panels.
W1
W1
H
Heatproof Foam Heatproof Foam
NOTE
• Heatproof foam improves the cooling capability
of the air conditioner.
• See the Electrical Data section for information
on attaching the power cord to an electrical
outlet.
EN
Screws Screws
(Type A) (Type A)
(Adhesive Backed) (Adhesive Backed)
W2
W W
W2
H H
H
15