Detecto 8432-CH Owner's Manual page 8

CHILD SEAT INSTALLATION, CONT.
5. Align the holes in the gimbal with the holes in the scale platform, and attach the gimbal to
the scale platform with the four 1 /4-20 x 1/2" screws.
6. Using the Philips screw driver, tighten the screws.
7. After the gimbal is installed, position the child
seat in the gimbal and attach with the #10-24 x
1/2" screws (two screws on each side of the
gimbal).
8. Periodically re-check the screws for tightness.
6
8525-0377-0M Rev A 8432-CH Owner's
1/4-20 x 1/2"
#10-24 x 1/2"