Connection And Configuration - D-Link DIR-615 Quick Installation Manual

CONNECTION AND CONFIGURATION

1. Connect the power cord to the power connector port on the back panel of the
router, then plug the power adapter into an electrical outlet or power strip.
2. Connect the router to your PC.
PC with Ethernet adapter: connect an Ethernet cable between an available
✔
LAN port of the router and the Ethernet port of your PC. Turn on your PC
and wait until your operating system is completely loaded. Make sure that
your Ethernet adapter is configured to obtain an IP address automatically.
PC with Wi-Fi adapter: turn on your PC and wait until your operating
✔
system is completely loaded. Then turn on your Wi-Fi adapter and make sure
that it is configured to obtain an IP address automatically. Connect to the
network DIR-615. Use WPS PIN from the barcode label as the network
key.
3. Start a web browser. In the address bar of the web browser, enter the IP address
of the router (by default, 192.168.0.1). Press the Enter key.
After the first access to the web-based interface you are forwarded to the start page of
the Setup Wizard.
Click the START button.
4.
5. Select a language for the router's web-based interface.
Click the CONTINUE button in order to configure the device with the Setup
6.
Wizard or the ADVANCED SETTINGS button to configure all needed setting
manually.
When the web-based interface is accessed the next time and after, the login page
opens. Enter the username (admin) in the Username field and the password you
specified in the Password field, then click the LOGIN button.
Use the menu in the top part of the page to configure the router.
To configure connection to the Internet, go to the Internet / WAN page in the
Settings section.
To configure the wireless network, go to the Wireless network page in the Settings
section.
The web-based interface of the router is multilingual. To select another language, go to
the Administration page in the Management section.
For detailed description of every page of the web-based interface, see the
"User Manual" document on D-Link website (see www.dlink.ru).