Advertisement
Quick Links
CD-IN Connector
Front Panel Audio Connector
MODEM-CN Connector
Onboard AC97 CODEC Chip
AUX-IN Connector
IrDA Connector
CNR Expansion Slot
32-bit PCI Expansion Slot x3
WOM (Wake on Modem) Connector
WOL (Wake on LAN) Connector
GPO Connector
System Power LED
nd
2
USB Port Connector
JP14 CMOS Clear Jumper
Front Panel Connector
4Mbit Flash ROM BIOS
Chassis Fan Connector
SPP/EPP/ECP
RJ-45 LAN
Parallel Port
Connector
PS/2 Keyboard
COM 1 Port
USB Port
Connector
MIDI/Game Port
VGA Connector
MIC-In
Line-In
Speaker Out
JP13 LAN Enable/Disable Select
Jumper (Optional)
JP28 Keyboard/Mouse Wake-up
Enable/Disable Jumper
Low ESR Condensers
COM2 Port Connector
AUX Fan Connector
DVO Connector
370-pin CPU Socket with
Frequency/Voltage Auto-detection that
®
®
supports Intel
Pentium
III and Celeron™
processors (including Coppermine and
Tualatin) 533MHz~1GHz+ CPU
ATX Power Connector
®
Intel
810E Chipset for MX3W-E3
Or 810 Chipset for MX3W-V3
CPU Fan
168-pin DIMM Socket x2 support
maximum memory size up to 512MB
RAM Power LED
JP23 FSB Select Jumper
FDD Connector
ATA/100 IDE Connector x2
Advertisement
Related Manuals for AOpen MX3W-E3
Summary of Contents for AOpen MX3W-E3
- Page 1 WOM (Wake on Modem) Connector Tualatin) 533MHz~1GHz+ CPU ATX Power Connector WOL (Wake on LAN) Connector ® Intel 810E Chipset for MX3W-E3 GPO Connector Or 810 Chipset for MX3W-V3 CPU Fan 168-pin DIMM Socket x2 support System Power LED maximum memory size up to 512MB...
- Page 2 1. JP14 Clear CMOS You can clear CMOS to restore system default setting. To clear the CMOS, follow the procedure below. 1. Turn off the system and unplug the AC power. 2. Remove ATX power cable from connector PWR2. Everything you need to boot this motherboard is included in this 3.
- Page 3 3. Installing CPU 5. Setting CPU Voltage & Frequency Setting CPU Core Voltage CPU Pin 1 and cut edge This motherboard supports CPU VID function. The CPU core voltage will be automatically detected and the range is from 1.3V to 3.5V. It is not necessary to set CPU Core Voltage. Pull up the CPU socket lever and up to 90-degree angle.
- Page 4 6. JP23 FSB/PCI Clock Ratio 8. Connecting IDE and Floppy Cables This jumper is used to specify the relationship of PCI and FSB clock. Generally Connect 34-pin floppy cable and 40-pin IDE cable to floppy connector FDD and IDE speaking, if you are not overclockers, we recommend you to set at the default setting. connector.
- Page 5 11. Front Audio Connector 13. Aopen Bonus Pack CD If the housing has been design with an audio port on the front panel, you’ll be able to You can use the autorun menu of Bonus CD disc. Choose the utility and driver and connect onboard audio to front panel through this connector.
- Page 6 15. Installing Onboard AGP Driver 17. BIOS Upgrade AOpen Easy Flash is an user-friendly flash method. The BIOS binary file and flash Intel 810E and 810 chipsets integrate a 2D/3D graphics accelerator and provides AGP routine are combined together and you simply run a single file to complete the flash 1X/2X incredible performance to access main memory at over 1GB/s.
- Page 7 IDE cable. The problem should be caused by the Check if the system can IDE cables or HDD itself. reboot successfully. Re-install Windows 95, Windows 98 or Windows NT. MX3W-E3 is model name of motherboard; R1.00 is BIOS version...
- Page 8 Dear Customer, Test Report: We recommend to choose board/card/device from the Thanks for choosing AOpen products. To provide the best and fastest service to compatibility test reports for assembling your PC. our customer is our first priority. However, we receive numerous emails and http://www.aopen.com/tech/report/default.htm...