Advertisement
Power On by Ring
During Disabled, the system will ignore any incoming call from the modem.
During Enabled, the system will boot up if there's an incoming call from the
modem.
Wake-Up on LAN
To use this function, you need a LAN add-on card which support power on
functions. It should also support the wake-up on LAN jumper (JWOL1).
Enabled
Disabled
USB KB Wake-Up From S3
This option is used to Enabled/Disabled USB keyboard wake up with
suspend to RAM.
CPU Thermal-Throttling
Select the CPU THRM-Throttling rate. The settings are: 25.0%, 37.5%, 50.0%,
62.5%, 75.0%, 87.5%.
Resume by Alarm
This function is for setting date and time for your computer to boot
up. During Disabled, you cannot use this function. During Enabled, choose
the Date and Time Alarm:
Date(of month) Alarm
Time(hh:mm:ss) Alarm
Note: If you have change the setting, you must let the system boot up
until it goes to the operating system, before this function will work.
Wake up on LAN supported.
Wake up on LAN not supported.
You can choose which month the
system will boot up. Set to 0, to boot
every day.
You can choose what hour, minute and
second the system will boot up.
3-24
®
Advertisement
