Canon MP970 Service Manual page 11

8.5"x11"(215x279).
Cannot specify "stickers" and "half-
side layout" together. Check markings
on handwriting sheet.
Change the setting after removing the
card.
The card is currently write-enabled. Set
to read-only mode before performing
operation.
The paper size is not correct. Check the
page size you have set.
Failed to scan Photo Index Sheet.
Check orientation and position, and
make sure platen and sheet are clean.
<See manual>
Failed to scan handwriting sheet.
Check orientation and position, and
make sure platen and sheet are clean.
<See manual>
Failed to scan DVD/CD handwriting
sheet.
Check orientation and position, and
make sure platen and sheet are clean.
Failed to scan Photo Index Sheet.
Check for missed and improper
markings.
Failed to scan handwriting sheet.
Check for missed and improper
markings.
Failed to scan DVD/CD handwriting
sheet. Check for missed and improper
markings.
Failed to scan. Either document cannot
be scanned or is not placed on the
platen glass.
Cover is open. Close cover.
Scanner is not operating correctly.
Film scanning error.
Remove FAU (Film Adapter Unit)
protective sheet.
This datum cannot be printed. Check
the cause of the issue on the print
setting screen of the TV. (Japan only)
available only with A4 or Letter size paper is
selected, but the paper size is not set to A4 or
Letter.
The selected layout on the handwriting sheet
is not supported for Stickers.
With a memory card inserted in the slot,
change of the Read/Write attribute was
attempted.
With the memory card set to the Read/write
mode, Card Direct printing operation was
attempted from the menu.
Non-supported size of paper for Camera
Direct printing via PictBridge connection is
selected.
The machine failed in scanning the Photo
Index Sheet.
The machine failed in scanning the
handwritten Photo Index Sheet.
The machine failed in scanning the
handwritten DVD / CD sheet.
The machine scanned the Photo Index Sheet,
but markings in the sheet were incorrect.
The machine scanned the handwritten Photo
Index Sheet, but markings in the sheet were
incorrect.
The machine scanned the DVD/CD
handwritten sheet, but markings in the sheet
was incorrect.
The machine failed in scanning the document
for Fit-to-page copy.
The cover was opened during printing.
The CIS cannot detect the home position, or
the scanner unit warming-up is not performed
properly at power-on.
- The light volume of the film lamp was
insufficient for film scanning.
- The FAU protective sheet was not removed.
- The film lamp did not turn on.
Failed in printing the contents from the digital
TV broadcasting. (because the root certificate
is old or the user can not access the update
server, etc.)
9 / 45
returns to the display before the error
occurrence.
A temporary error. Press the OK button to
clear the error. The LCD returns to the
display before the error occurrence.
A temporary error. Remove the memory card,
then change the Read/Write attribute.
A temporary error. Remove the memory card,
change the memory card setting to Read-only,
then perform Card Direct printing.
Cancel printing on the digital camera.
Confirm the paper size, and print again.
Press the OK button to clear the error.
Confirm the following, then try again:
- Fill in all the circles on the Photo Index
Sheet.
- Place the sheet in the correct orientation and
position.
Press the OK button to clear the error.
Confirm the following, then try again:
- Fill in all the circles on the Photo Index
Sheet properly.
- Place the sheet in the correct orientation and
position.
Press the OK button to clear the error. Correct
the settings, then try the operation again.
Close the cover. The LCD returns to the
display before the error occurrence.
Press the OK button to clear the error, and
turn the machine off and on again. If the error
still occurs, repair servicing is required.
Press the OK button to clear the error. If the
FAU lamp does not turn on, repair servicing
is required.
Confirm the connection settings. If a
temporary communication error of the server
causes the issue, perform printing again after
a while.