Power Supply Unit; Removing Power Supply Unit Or Psu - Dell OptiPlex 5060 Tower Service Manual

3. Replace the two (M3X3) screws to secure the optional VGA module to the system.
4. Install the system fan
5. Close the front panel
6. Install the:
a. Front bezel
b. Side cover
7. Follow the procedure in

Power supply unit

Removing power supply unit or PSU

1. Follow the procedure in
2. Remove the:
a. Side cover
b. Front bezel
3. Open the front panel
4. To release the PSU:
a. Disconnect the PSU cables from the connectors on the system board [1].
b. Unroute the PSU cables from the retention clips [2, 3, 4, 5].
c. Disconnect the PSU cables from the connectors on the system board [6].
42 Removing and installing components
.
door.
After working inside your
Before working inside your
door.
computer.
computer.